Thursday, 9 June 2011

Browse » Home » » » » Jawbone Pairing Guides and Troubleshooting

Jawbone Pairing Guides and Troubleshooting


Jawbone ERA Bluetooth headset

 

Pairing the Jawbone ERA to Your Cell Phone

  1. Put your phone into pairing mode This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.
  2. Put your Jawbone ERA into pairing mode The first time you turn your Jawbone ERA on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, you have two options:
    Option 1: Turn your Jawbone on (slide the power switch to ON, the position where you can see the blue indicator) and shake the headset back and forth two times. The LED light that surrounds the little rubber piece that rests against your cheek will flash red and white once the headset is in pairing mode. Once you see this, you can proceed to step 3.
    OR
    Option 2: Start with headset off (slide the power switch to OFF, the position where you cannot see the blue indicator). Press and hold the button on the back of the headset and slide the power switch to ON. Continue to hold down the button until you see the LED light flash red and white (the LED surrounds the little rubber piece that rests against your cheek, then release the talk button. The headset is now in pairing mode and you can continue to step 3.
  3. Select device and enter in universal keyYour phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000
  4. You are paired up!
Jawbone ICON Bluetooth headset

Pairing the Jawbone ICON to Your Cell Phone

  1. Put your phone into pairing mode This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.
  2. Put your Jawbone ICON into pairing mode The first time you turn your Jawbone ICON on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, start with headset off (slide the power switch to OFF, the position where you cannot see the blue indicator). Press and hold the button on the back of the headset and slide the power switch to ON. Continue to hold down the button until you see the LED light flash red and white (the LED surrounds the little rubber piece that rests against your cheek, then release the talk button. The headset is now in pairing mode.
  3. Select device and enter in universal keyYour phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000
  4. You are paired up!
Jawbone Prime Bluetooth headset in Bah Bah Black Jawbone 2 Bluetooth headset in Bah Bah Black

Pairing the Jawbone Prime or Jawbone 2 Bluetooth Headset to Your
Cell Phone

  1. Put your phone into pairing mode This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.
  2. Put your Jawbone 2 Bluetooth headset into pairing mode The first time you turn your Jawbone on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, start with headset off. Hold down the NoiseAssasin button and power on. Continue to hold down button for 2 seconds. Headset will flash red and white when it is in paring mode.
    If you are having trouble with this step, try pushing in the NoiseAssassin button just a half a second before you push in the talk button.
  3. Select device and enter in universal keyYour phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000
  4. You are paired up!

Advertisement:

No comments:

Post a Comment

Note: only a member of this blog may post a comment.