Monday, 13 June 2011

Browse » Home » » » » » How to replace a broken LCD screen for Sony DCR-H26 camcorder

How to replace a broken LCD screen for Sony DCR-H26 camcorder

Do you have a cracked LCD  on your Sony DCR-H26? Or the touch screen is not functioning any more? You need to replace the LCD screen.
Since we don’t need to open the whole camcorder in this case, just only several steps, you can replace it DIY.
Here is the new LCD screen.
dcr-h26-lcd-03
Remove the battery. Swing the LCD and turn it to show the screw as on figure 1. Remove the screw, turn the LCD to the other way and remove another screw.
dcr-h26-lcd-01
Remove two black screws shown on figure 2.
dcr-h26-lcd-02
Gently open the LCD back cover, remove the screw shown on figure 4. Unlock the connectors and disconnect all the cables.
dcr-h26-lcd-04
Take out the circuit board, and then you can see the LCD panel. Hold the LCD data cable and take the broken LCD out.
dcr-h26-lcd-05
Carefully put the new LCD in and put on the circuit board. Put the screw back, connect all the cables back and secure them properly.
dcr-h26-lcd-06
Close the LCD cover. We are done!
Advertisement:

No comments:

Post a Comment

Note: only a member of this blog may post a comment.